Anveshanam

Introduction
Anveshanam

Cash prizes worth 25000 INR to be won!

Electrical, Computer, Building, Chemical & Material Sciences, 27th February, 0900 hrs to 1700 hrs, CEESAT Conference Hall

Mechanical Sciences and Production Technology, 28th February, 0900 hrs to 1700 hrs, CEESAT Conference Hall

RE-SEARCH as it states means ‘SEARCHING OVER AND OVER AGAIN’.

Well, then scientific creativity is required for innovation.

In that case, do you think you have the GIFTED MIND?

Now you can research on anything under the sun and if our panel of expert judges like it, you might just be walking away with the prize... Of course, originality does count as we are looking for people who are searching for something new although it is called Re-search. And as always,

WHO DARES WINS!!! 

 WHATS NEW?????

  • Participants will get to interact with the eminent judges from the Industrial Sector and Institutes like the IITs.
  • The winning papers will be compiled and presented in the form of a booklet to the participants. 

Presentation

  1. The presentation time will be 10 minutes + 10 mins for questions and answers.
  2. Exceeding of time limit will invoke negative points.
  3. Please bring your presentation in the form of .ppt or .pdf. Any other form of the file will not be entertained, please bring the file in a pen drive (avoid CD/DVD).
  4. The participants can include any type of media (pictures, videos) in their presentation, provided they do not show any controversial clips.
  5. All participants are strongly requested to be present at the venue 5 minutes prior to the start of the presentation; once the event has begun the doors of the presentation hall will be closed and further entry will not be allowed. This is a very specific rule to be followed as it was requested by the judges themselves.

Things to be bought along with you for the presentation:

  1. A valid College ID Card
  2. Two Hard Copies (printouts) of their paper which has been selected for presentation
  3. If possible, a hard copy of their presentation

Registrations are now closed. Short-list of participants are out and can be accessed here.

Event Format

The contest enables students from all streams of engineering to present their ideas in the form of a paper which they will present in front of an elite panel of judges.

Short-listing of Papers

  • Participants have to submit their papers (only full papers are accepted; abstracts will not be considered) to the Anveshanam Team through the Registration Page.
  • The papers will be divided into their respective clusters and sent for scrutiny.
  • The shortlisted participants will be notified by email (it would also be updated in the website).

Presentation Details

  • Selected participants for the final round are requested to prepare their presentation in Microsoft Powerpoint format (.ppt) or Printable Document Format (.pdf) only.
  • Information regarding the presentation time (inclusive of time for questions and answers) will be updated in this space soon.
  • However, on a rough scale, participants can prepare their presentation for a period of 12 minutes (excluding time for questions and answers).
  • Exact time allotment for questions/answers will vary depending upon the number of selected participants for the final round and will also depend upon the judge’s schedule.
  • Selected participants will be provided with two mikes and a laser pointer.
  • They can manually change the slides/pages of their presentation, if not they can also request the coordinators to do the slide transitions.

Judging Criteria

The papers submitted will be judged on the following grounds.

  • Originality & Innovation
  • Technical Content
  • Clarity of Presentation
  • Practical Application

Papers will be awarded points based on this criteria and the decision is left to the Judge's discretion.

Topic Clusters

 The various streams have been broadly classified in to:

  1. Building Sciences
  2. Chemical and Material Sciences
  3. Computer Sciences
  4. Electrical Sciences
  5. Mechanical Sciences and Production Technology

Note: Papers on topics other than those mentioned in each section are also welcome, if they come under the purview of the streams mentioned above.


 

         BUILDING SCIENCES:

        CHEMICAL & MATERIAL SCIENCES

  • Innovative Materials and Smart Structures
  • Disaster Management and Rehabilitation of Damaged Structures
  • Advances in Soil Exploration and Substructure Design
  • Ground Improvement Techniques
  • Remote Sensing and Geographical Information System (GIS)
  • Water and Wastewater Management and Air quality management
  • Intelligent Transportation Systems
  • Sustainable Waste Management
  • Earth quake resistant structures and Dynamic analysis of Structures
  • Any other latest developments in Civil Engineering
  • Novel Separation Techniques 
  • Process Dynamics, Modeling, Simulation & Control
  • Polymers
  • Heat and Mass transfer
  • Reaction engineering
  • Environmental Engineering & Non-Conventional Energy Sources
  • Biochemical engineering & Biotechnology
  • Nanotechnology
  • Ceramics, Composites and Advanced Materials
  • Mechanical Metallurgy
  • Powder Metallurgy
  • Computational Chemistry

        COMPUTER SCIENCES

        ELECTRICAL SCIENCES

  • Neural Networks
  • Artificial Intelligence & Machine Learning
  • Natural Language Processing
  • Cryptography and Network Security
  • Parallel and Distributed Computing
  • Visualization and Computer Graphics
  • Mobile Computing
  • Sensor Networks
  • Information Retrieval, Databases and Data Mining
  • Software Systems and Architecture
  • Multimedia Systems
  • Power quality & HVDC
  • Power Electronic Devices and Applications
  • Programmable Logic Controller & Distributed Control System
  • VLSI / ULSI / FPGA - Design & Applications
  • MEMS
  • Wireless communication
  • Speech / Image processing
  • Fibre optics and optical communication
  • Blue tooth communication 
  • Fuzzy Systems
  • Microwave Technology

        MECHANICAL SCIENCES & PRODUCTION TECHNOLOGY

 
  • Cryogenics, Air Conditioning/Refrigeration 
  • Computational fluid dynamics 
  • Advanced IC engines 
  • Design innovations 
  • Smart machines 
  • Finite Element Analysis
  • Production/ manufacturing technology 
  • Newer trends in manufacturing 
  • Advances in tool design 
  • Optimization techniques
Rules and Regulations
  • Maximum of two members allowed per team.
  • Any number of teams from a college can submit their papers.
  • Participants are not allowed to submit more than one paper.
  • Participants can submit their papers in a maximum of 2 clusters, depending on the content of the paper.
  • If shortlisted, they will be allowed to present it in only one cluster. (Specify your priorities in case of selection in both clusters).
  • Participants are required to send a soft copy of their entire paper, in the IEEE format (right click, save as, to download the format)
  • The paper length should not exceed 10 pages, of the format specified.
  • Participants whose papers are shortlisted shall be informed personally through mail. The names will be put up on the website as well.
  • Participation certificate will be given to all the shortlisted participants.

Eligibility Criteria

Participants with a valid identity card and a Bonafide Certificate from their institute are eligible to participate in Anveshanam.

Paper Submission

  • Participants have to submit their FULL paper for scrutiny, abstracts WILL NOT be entertained.
  • LAST DATE FOR SUBMISSION OF PAPERS IS FEBRUARY 7th 2010.
  • The document format has to be in Microsoft Word (.doc or .docx) or Printable Document Format (.pdf) only.
  • The title of the submitted file must be a shortened version of their paper title. (eg: Suppose my paper title is “How to make the tastiest lemon juice from a given lemon, squeezer, water and ice”, then the name of my file will be “making tastiest lemon juice.doc”)
  • Participants are requested to submit their papers in IEEE format (provided above). In case it is not possible, submitting the papers in any internationally recognized format is allowed. Else, they can submit their papers in a neat, legible, coherently arranged format , with perfect alignment, font adjustments (sizes, font type), naming of figures/tables/charts and references.
  • Papers with improper formatting will be sent back to the participants and they are encouraged it submit it again after re-formatting.
  • Kindly keep the font color of your paper as black (excluding figures, charts, tables).
  • Kindly provide your names, email addresses and contact numbers in the paper that you submit.
Contacts

Karthik R
+919597118363

Barath Ezhilan
+919994904797

Formula: 0

Login



Lost Password? | Sign Up