Close

Team Specification

• Maximum of 5 members in a team.

• Team members can be from different colleges.

• All students with a valid identity card from their respective educational institution and a Pragyan id. are eligible to participate in Robowars.

 

Safety Rules

• Compliance with all event rules is mandatory. It is expected that competitors stay within the rules and procedures of their own accord and do not require constant policing

• Special care should be taken to protect the on-board batteries and pneumatics, robot without proper protection will not be allowed to compete.

• If you have a robot or weapon design that does not fit within the categories set forth in these rules or is in some way ambiguous or borderline, please contact the event organizers. Safe innovation is always encouraged, but surprising the organizers with your brilliant exploitation of a loophole may cause your robot to be disqualified before it even competes.

• Each event has safety inspections. It is at their sole discretion that your robot is allowed to compete. As a builder you are obligated to disclose all operating principles and potential dangers to the inspection staff.

• Proper activation and deactivation of robots is critical. Robots must only be activated in the arena, testing areas, or with expressed consent of the event coordinators.

• All participants build and operate robots at their own risk. Combat robotics is inherently dangerous. There is no amount of regulation that can encompass all the dangers involved. Please take care to not hurt yourself or others when building, testing and competing.

• All weapons must have a safety cover on any sharp edges. to the surroundings during the stay of the teams in the competition area should not be carried out without the consent of organizers. Not following this rule may result in disqualification.

• All the resources provided at the time of competition from the organizers should be strictly used only after the consent of the organizers.

• Once the robots have entered into the arena, no team members can enter into the arena at any point of time. In case if fight has to be halted in between and some changes have to be done in the arena or condition of the robot(s), it will be done by organizers only.

 

Dimensions and Fabrications

• The machine should fit in a box of dimension 600 mm x 600 mm x 1000 mm (lxbxh) at any given point during the match. The external device used to control the machine or any external tank is not included in the size constraint.

• The machine should not exceed 35 kg of weight including the weight of onboard pneumatic source/tank in case an external pneumatic tanks/source1.5 times the weight of the tank will be added to the weight of the bot.

• Weight of adaptors and the remote controller will not be counted.

It is compulsory for every team to use the components provided by Texas Instruments.

 

Mobility

• All robots must have easily visible and controlled mobility in order to compete.

• Any machine component should not be detached (intentionally) during any point of the war.

• Methods of Mobility include:

    • Rolling (wheels, tracks or the whole robot)

    • Walking (linear actuated legs with no rolling or cam operated motion).

    • Shuffling(rotational cam operated legs)

• Not allowed :

    • Jumping and hopping

    • Flying (airfoil using, helium balloons, ornithopters, hovercrafts etc.)

 

Robot Control Requirements

• The machine can be controlled through wired or wireless remote.

• The machines using wireless remote must at least have a four frequency remote control circuit or two dual control circuits which may be interchanged before the start of the race to avoid frequency interference with other teams. The case of any interference in the wireless systems will not be considered for rematch or results.

• Remote control systems from toys might be used. Remote control systems available in the market may also be used.

 

Battery and Power

• The machine can be powered electrically only. Use of an IC engine in any form is not allowed. On board Batteries must be sealed, immobilized-electrolyte types (such as gel cells, lithium, NiCad, NiMH,or dry cells).

• The electric voltage between 2 points anywhere in the machine should not be more than 36 V DC at any point of time.

• All efforts must be made to protect battery terminals from a direct short and causing a battery fire,failure to do so will cause direct disqualification.

• Use of damaged, non-leak proof batteries may lead to disqualification.

• Special care should be taken to protect the on-board batteries.

• Change of battery will not be allowed during the match.

• One 220V power socket will be provided for each team.

 

Pneumatics

• Robot can use pressurized non-inflammable gases to actuate pneumatic devices. Maximum allowed outlet nozzle pressure is 8 bar. The storage tank and pressure regulators used by teams need to be certified and teams using pneumatics are required to produce the Safety and Security letters at the Registration Desk at the venue. Failing to do so will lead to direct disqualification.

• Participants must be able to indicate the used pressure with integrated or temporarily fitted pressure gauge. Also there should be provision to check the cylinder pressure on the bot.

• The maximum pressure in cylinder should not exceed the rated pressure at any point of time.

• You must have a safe way of refilling the system and determining the on board pressure.

• All pneumatic components on board a robot must be securely mounted. Care must be taken while mounting the pressure vessel and armour to ensure that if ruptured it will not escape the robot. The terms 'pressure vessel, bottle, and source tank' are used interchangeably.

 

Hydraulics

• Robot can use non-inflammable liquid to actuate hydraulic devices e.g. cylinders.

• All hydraulic components on-board a robot must be securely mounted. Special care must be taken while mounting pump, accumulator and armour to ensure that if ruptured direct fluid streams will not escape the robot.

• All hydraulic liquids are required to be non corrosive and your device should be leak proof. Maximum allowed pressure is 8 bars.

• Participant must be able to indicate the used pressure with integrated or temporarily fitted pressure gauge.

• Entire hydraulic setup should be onboard, no external input (from outside the arena) could be given to the robot for functioning of its hydraulic system.

 

Weapons Systems

• Robots can have any kind of magnetic weapons, cutters, flippers, saws, lifting devices, spinning hammers etc. as weapons with following exceptions and limitations:

      • Liquid projectiles.

      • Any kind of inflammable liquid.

      • Flame-based weapons.

      • Any kind of explosive or intentionally ignited solid or potentially ignitable solid.

      • Nets, tape, glue, or any other entanglement device.

      • High power magnets or electromagnets.

      • Radio jamming, tazers, tesla coils, or any other high-voltage device.

      • Tethered or un-tethered projectiles.

      • Spinning weapons which do not come in contact with the arena at any point of time are allowed.

In no case should the arena be damaged by any bot.

 

 

Follow @nitt_pragyan
Click here for details about
L&T Technical Ideation Contest
Controls Help [H]

Controls

Navigation
Select / Go To
Close / Go Back
Search
Home Menu
Mute BG Music
Mute Sound Effects
Login
Profile
Help
For queries, mail to
prasanna@pragyan.org

Developed by Delta Force.
Designed by NITT-Design Team.

Actions

LOGIN [L]

Close